 |
 |
 |
|
Disclaimers:
If this cabinet is ordered with a height over 48?, it will receive a two-panel door configuration. Each door will include two panels separated by a horizontal rail to maintain strength and minimize warping or bowing.
This cabinet features a recessed bottom, allowing under-cabinet lighting to be installed behind the cabinet doors without the need for a separate light valance molding. The doors will cover the light fixtures, creating a clean, seamless look with no added moldings.
When the doors are open, the light fixtures may be visible at eye level. See reference images.
If desired, the light fixtures can be concealed by adding a separate square trim piece between the left and right cabinet sides. The MSQUARTRIM product is sold in long lengths, cut to size on site, and installed on the underside of the cabinet to hide the fixtures when the doors are open. This is an optional millwork item and is not included with the cabinet. It must be ordered separately if needed.
An optional recessed top is also available for integrated above-cabinet lighting. This allows lighting to be hidden behind the cabinet doors at the top, creating a clean ambient effect with light shining both upward and downward, giving the cabinet a subtle glow without visible molding.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
QUICK FACTS
- This cabinet is shipped "ready to assemble".
See "Assembly Instructions" category for more info on how to assemble
your cabinets.
- Construction holes will be visible on the sides
of the cabinet once assembled. Finished end panels (ordered separately)
should be ordered to finish off the exposed cabinet sides after
installation.
- The interior of this cabinet will be real maple
wood veneer over a 3/4" Purebond Plywood (no VOC), finished with a clear
UV (baked-on, UV wood, No VOC). Purebond plywood is top-of-the-line and
Made in the USA.
- Doors, drawer fronts, drawer boxes, and face
of the cabinet case will be raw wood unless ordered with an optional
finish of your choice. See our "wood samples" category for available
finishes and corresponding edge banding material specifications.
- The
toe kick of the cabinet will show exposed plywood core. Real wood toe
skins (ordered separately) should be used to cover the face of the toe
kick once all cabinets are installed. See the "Millwork" category.
General Cabinet Specifications
- Construction- Full overlay, European style, frameless cabinet case construction
- Cabinet Case Interior
- Standard Cabinets- 3/4" thick Purebond plywood with a natural finished maple veneer (UV wood, baked on acrylate finish, scratch and dent resistant). Columbia Purebond plywood is formaldehyde free premium grade plywood (made in USA with North American lumber).
- Glass door and exposed interior cabinets- Unfinished/raw purebond plywood with wood veneer that matches the wood species and finish selected for the face of the cabinet case/doors.
- Drawer Boxes (if applicable)- 5/8" thick dovetailed drawer boxes (1/4" thick fully captured bottoms, 100 lbs capacity), fully assembled, then sanded, then sprayed with a natural CLEARCOAT conversion varnish to ensure smooth dovetailed joints (furniture grade).
- Drawer Slides (if applicable)- Blum Blumotion integrated soft closing/self closing under mounted drawer slides (heavy duty version, made in USA, 100 lbs capacity)
- Hinges (if applicable)-Blum Clip Top integrated soft closing/self closing hinges (heavy duty version, made in USA, fully adjustable)
- Finishing- Doors, drawer fronts, and face of cabinet are available
in raw wood (apply finish on site), or with one of our available conversion varnish based finishes already applied.
|
|
|
|
|
|
|