 |
 |
 |
|
This is a standard finished end panel designed for tall cabinet applications measuring 96" and taller. It is a flat end panel with square edges that installs directly to the side of the cabinet. The front and back edges are banded with real wood veneer, while the top and bottom edges are exposed plywood.
Disclaimer: This is an oversized product exceeding 96" in height and requires special shipping considerations. Delivery may be delayed due to liftgate limitations. These tall pieces are packed on short, wide pallets, with weight kept as low as possible to improve handling at delivery. Despite this, the panel's height and overall size can still create delivery challenges that are outside of our control.
As a result, this product may require an alternate delivery method and may ship later than the estimated timeframe. Please be prepared to work directly with the delivery carrier to coordinate and accept delivery.
Due to the size, weight, and awkward dimensions of this product, the likelihood of shipping damage is significantly higher than standard items. This product may also experience delays related to delivery constraints and material sourcing. Lead times are not guaranteed and may increase based on material availability, production factors, or shipping conditions.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
QUICK FACTS
- This cabinet is shipped "ready to assemble".
See "Assembly Instructions" category for more info on how to assemble
your cabinets.
- Construction holes will be visible on the sides
of the cabinet once assembled. Finished end panels (ordered separately)
should be ordered to finish off the exposed cabinet sides after
installation.
- The interior of this cabinet will be real maple
wood veneer over a 3/4" Purebond Plywood (no VOC), finished with a clear
UV (baked-on, UV wood, No VOC). Purebond plywood is top-of-the-line and
Made in the USA.
- Doors, drawer fronts, drawer boxes, and face
of the cabinet case will be raw wood unless ordered with an optional
finish of your choice. See our "wood samples" category for available
finishes and corresponding edge banding material specifications.
- The
toe kick of the cabinet will show exposed plywood core. Real wood toe
skins (ordered separately) should be used to cover the face of the toe
kick once all cabinets are installed. See the "Millwork" category.
General Cabinet Specifications
- Construction- Full overlay, European style, frameless cabinet case construction
- Cabinet Case Interior
- Standard Cabinets- 3/4" thick Purebond plywood with a natural finished maple veneer (UV wood, baked on acrylate finish, scratch and dent resistant). Columbia Purebond plywood is formaldehyde free premium grade plywood (made in USA with North American lumber).
- Glass door and exposed interior cabinets- Unfinished/raw purebond plywood with wood veneer that matches the wood species and finish selected for the face of the cabinet case/doors.
- Drawer Boxes (if applicable)- 5/8" thick dovetailed drawer boxes (1/4" thick fully captured bottoms, 100 lbs capacity), fully assembled, then sanded, then sprayed with a natural CLEARCOAT conversion varnish to ensure smooth dovetailed joints (furniture grade).
- Drawer Slides (if applicable)- Blum Blumotion integrated soft closing/self closing under mounted drawer slides (heavy duty version, made in USA, 100 lbs capacity)
- Hinges (if applicable)-Blum Clip Top integrated soft closing/self closing hinges (heavy duty version, made in USA, fully adjustable)
- Finishing- Doors, drawer fronts, and face of cabinet are available
in raw wood (apply finish on site), or with one of our available conversion varnish based finishes already applied.
|
|
|
|
|
|
|