1. Apply the Blum locking
devices to the underside of the drawer box as shown below using the 5/8"
long hinge screws.
2. Identify whether this drawer box is
going to be a Top Drawer, Middle Drawer, or a Bottom Drawer. See the pictures
below for further explanation. Place the drawer front face down on a flat
surface. Locate the appropriate mounting holes on the back side of the drawer
3. Take the corresponding drawer box and locate
the drawer front mounting holes drilled at the front of the drawer box. Use the
"drawer front mounting screws" to securely fasten the drawer box to
the drawer front.
4. All done, your drawer box is ready to be installed into the cabinet.
Mount drawer fronts to the drawer box:
Attach locking devices to the bottom of the drawer box: